Sandblaster

Hey Do-It-Yourselfer,  You may be interested in our new post titled: Can sandblasting cause silicosis? and can be seen below. Please check it out and leave me any comments or questions below this article:   [...]

Hey Do-It-Yourselfer,  You may be interested in our new post titled: What sandblasting media is best for aluminum? and can be seen below. Please check it out and leave me any comments or questions below [...]

Hi Do-It-Yourselfer, Its been awhile since I created a new blog post about my latest sandblasting projects.  I recently made a new post which shows my home made pressure sandblaster. I would appreciate it if [...]

Hey Do-It-Yourselfer,  You may be interested in our new post titled: Selecting the Right Sandblasting Abrasive Material and can be seen below. Please check it out and leave me any comments or questions below this [...]

Hey Do-It-Yourselfer If you sandblast frequently or use hard abrasives used in sandcarving or industrial use, you may want to check out this latest video on the ROCtec nozzle. It is produced by the Kennametal [...]

Do-It-Yourselfer I am sure you know this or already have one, hopefully. You need to make sure your sandblaster has one of these safety pressure release valves or it could be very dangerous. In the [...]

Hey Do-It-Yourselfer I also forgot to state that the whole reference chart is updated on our site. It now shows the required air compressor CFM output needed for all common nozzle sizes such as: 1/16” [...]

Hi Do-It-Yourselfer One of the most asked questions I get is how do I find the right air compressor that supports my smaller bore nozzle. Specifications for the 1/16" and 3/32" inner diameter bore sizes [...]

Do-It-Yourselfer I forgot to mention in my last email that the updated sandblaster pressure pot plans also includes a new bonus called: What Abrasive Grit Size Can Fit Through My Nozzle? This explains the rule [...]