Barb Hose Fittings to Connect Sandblaster Nozzle with 1/2″ ID or 3/8″ ID Hose
Regardless of the nozzle sizes that we offer (the large nozzle with 3/4″ NPT or the small nozzle with the 3/8″ NPT thread connection), you can use either with any size pressure pot sandblaster or hose size. Currently, we offer both thread sizes below with this barbed fitting to connect with a more common 1/2″
The post Barb Hose Fittings to Connect Sandblaster Nozzle with 1/2″ ID or 3/8″ ID Hose first appeared on Sandblaster & Sandblasting Equipment Info. Center ©.
As a reminder, you’re receiving this because you signed up for our newsletter on our website.
I very much appreciate your support of our small business, regardless if you order from us or simply follow our newsletter! It means a lot to me and I like you for it- thank you!
Please Check Out Our Sandblasting Supplies
Large Type 1 Nozzle Holder & TipFor folks that want the larger and popular Type 1 |
Replacement Type 1 TipThis is for replacement ceramic Type 1 tips. |
Replacement Type 1 Carbide TipThis is for replacement carbide version of Type 1 tips. |
|||||||||
|
|
|
Type 2 Nozzle Holder & TipThis is the smaller standard size used on most non-commercial blasters and inside cabinets. |
Type 2 Nozzle Holder & Carbide TipThis is the same as previous except it can a carbide tip. Upgrade to this and you will be glad you did! It will last significantly longer. |
Replacement Type 2 Carbide TipsThis is a replacement tip with our long lasting composite carbide in the type 2 size. It comes with three different bore sizes. |
|||||||||
|
|
|
We also carry other supplies. See all our supplies listed on Amazon over there >>.
For folks that prefer ordering directly through us, we also supply the above products on our site (many of them for a discount) on our shop page. Orders are processed through the secure third party system at checkout.
6720 Kepler Rd
Unit A7
Cleves OH 45002
USA
View our Sandblaster Supplies & Information
Leave A Comment