Well it depends on your air compressor size and the abrasive grit size you will be using. I calculated the correct size nozzle you should use for both of these specs and put it in an easy to read chart.
You will want to bookmark this page because it is super helpful in determining the correct nozzle to use.
If you don’t mind, please check it out and leave me a comment below the article if it was helpful, along with any questions >>>
https://www.sandblasterinfo.com/how-to-select-a-sandblaster-id-bore-size-for-your-air-compressor-grit-size/ Thank you so much in advance.
Eric
As a reminder, you’re receiving this because you signed up for our newsletter on our website.
I very much appreciate your support of our small business, regardless if you order from us or simply follow our newsletter! It means a lot to me and I like you for it- thank you!
Please Check Out Our Sandblasting Supplies
Large Type 1 Nozzle Holder & TipFor folks that want the larger and popular Type 1 |
Replacement Type 1 TipThis is for replacement ceramic Type 1 tips. |
Replacement Type 1 Carbide TipThis is for replacement carbide version of Type 1 tips. |
|||||||||
|
|
|
Type 2 Nozzle Holder & TipThis is the smaller standard size used on most non-commercial blasters and inside cabinets. |
Type 2 Nozzle Holder & Carbide TipThis is the same as previous except it can a carbide tip. Upgrade to this and you will be glad you did! It will last significantly longer. |
Replacement Type 2 Carbide TipsThis is a replacement tip with our long lasting composite carbide in the type 2 size. It comes with three different bore sizes. |
|||||||||
|
|
|
We also carry other supplies. See all our supplies listed on Amazon over there >>.
For folks that prefer ordering directly through us, we also supply the above products on our site (many of them for a discount) on our shop page. Orders are processed through the secure third party system at checkout.
6720 Kepler Rd
Unit A7
Cleves OH 45002
USA
Leave A Comment